Drive On. Centre Up. Get Home Easier.
BIGVEE™ is the drive-on bow stop that guides your boat back to center as it meets the trailer even when the ramp, wind, or current is working against you.
Built for the Moment the Boat Meets the Trailer
For decades, the bow stop had one job: sit there and wait to get hit. BIGVEE™ does more. Its wide V-shape catches the bow and steers it back toward center as you drive on so the trailer does the aiming, not you.
Built for Drive-On Loading
Come in a little off-line and BIGVEE™ gives the bow a wider target and a smoother path home a cleaner catch, a softer touch, and a calmer finish.
Shop Now
- Catches off-centre approaches
- Steers the bow to center
- Cuts the ramp-side wrestle
One BIGVEE. Built to Replace Your Old Stop.
BIGVEE™ drops in where almost any common bow stop lives. The 3" (75mm) mounting face fits most standard brackets, and the included shims extend the fitment out to 4.7" (120mm).
14.75" V-Catch
A wide V-shaped guide gives the bow plenty of room to find center.
Shimmed to Fit
Included shims adapt the mount from 3" out to 4.7" — no guesswork.
Bolt-Ready Hardware
Ships with a hardened M12 bolt and adapter rings for common fittings.
Made for Launch Ramps
Built for wet trailers, wind, current, and back-to-back loading days.
Because Loading the Boat Shouldn't Be the Hardest Part of the Day.
BIGVEE™ was built for real launch ramps wind, current, slick concrete, and boaters who just want the boat on straight without the end-of-day drama.
Shop Now
You wouldn't winch your car onto a trailer with a cable. You'd drive it on. Your boat should be no different."
With BIGVEE, the bow finds center every time. No more pushing it over at the end of a long day on the water.
Wind up or current running, it still loads first try. The V-catch corrects the approach so I don't have to.
Swapped it in for the rubber stop in ten minutes. The boat centres right in now, not bouncing off to one side.
See BIGVEE Where It Works.
From trailer fitment to drive-on loading, see BIGVEE™ in the conditions it was built for real ramps, real boats, and the kind of days every boater knows.
Before You Swap Your Bow Stop.
A quick rundown of how BIGVEE™ works, what it fits, and why a wider V makes drive-on loading easier.
What is BIGVEE™?
BIGVEE™ is a drive-on bow stop with a wide V-shaped catch that guides your boat back to center as it reaches the trailer.
How does it make loading easier?
The wide V gives your bow a bigger target. Instead of lining up perfectly by eye, you drive on and let the V steer the bow to center — even if your approach is a little off.
Will BIGVEE™ fit my trailer?
Almost certainly. The 3" (75mm) mounting face fits most standard bow-stop brackets, and the included shims extend the fitment to 4.7" (120mm). If you can mount a standard stop, you can mount a BIGVEE™.
Can I install BIGVEE™ myself?
Yes. It's a straightforward swap with basic hand tools — most owners have it fitted in well under an hour. The hardened M12 bolt and adapter rings are included.
Can it help protect my boat?
By guiding the bow to center before it makes contact, BIGVEE™ reduces the off-angle bumps and scrapes that come from missing a narrow stop. A cleaner catch means a gentler landing.
Does it work in wind and current?
That's exactly what it's built for. When wind or current pushes your bow off line, the wide V-catch collects it and redirects it to center — so you load clean even when conditions aren't cooperating.
What comes in the box?
Your BIGVEE™ unit, fitment shims (3" to 4.7"), a hardened M12 bolt, adapter rings for common fittings, and a quick-start fitting guide.